Common Specifications |
Print Head Density |
8dots/mm(203dpi) |
Bar Codes |
Print Speed |
50mm/sec(2") or 75mm/sec(3") |
Bar codes Supported |
EAN 8 & 13; ADD2; ADD5; Code 39; UPC A & E; Code 128/A/B/C; EAN 128; 12 of 5; CODABAR; MSI; Code 93; POSTNET; 2-D Codes: MAXICODE; DATA MATRIX; PDF 417 |
Media |
Media |
Roll or fan-fold die-cut labels and tage, synthetic or paper face stock inside |
Media Width |
51-118mm(2"to 4.65") |
Bar Code Rotations |
0°; 90°; 180°; 270° |
Max Roll Diameter |
125mm(4.9") |
Bar Code Ratios |
1:2; 1:3 and 2:5 are supported |
Label Roll Core Diameter |
25.4mm(1") |
Fonts |
Max Print Width |
117mm(4.6") |
Fonts |
Compatible with all SATO CLPrinters Code Page 850, others available. U; S; M; WB; WL; SU; XS; XM; XB; XL;OCR-A/B; Outline Font (50-999 dots) |
Max Print Length |
356mm(14") |
Max Label Length |
356mm(14") |
|
|
|
|
Min Label Length |
9.5mm(0.375") |
Text Rotation |
0°; 90°; 180°; 270° |
Min Inter-Label Gap |
3.0mm(0.11") |
Graphic Modes |
Max Inter-Label Gap |
25.4mm(1") |
Graphic Formats |
SATO Hex/Binary formats; PCX Format |
Max Media Calliper |
0.08mm to 0.25mm (3mils to 10mils) |
Graphic Rotation |
0°; 90°; 180°; 270° |
Media Sensing |
Left-justified, See-through sensor for die-cut gap or notched media. Left-justified reflective sensor for I-mark. Continuous material. |
Others |
Interface |
Electrical |
230V AC; 50/60Hz |
Ports |
9-pin RS232 Serial & 36-pin Centronics |
Size |
W 254mm x D 175mm x H 168mm |
Baud Rates |
600-19200 bps |
Environment |
Operating :5 to 40 C
Storage :-20 to 50 C
Humidity :25 to 85% RH, non condensing |
Flow Control |
Xon/Xoff and RTS/CTS protocols |
Approvals |
CE; TUV; FCC Class A; U/L; CSA |
Internal Data Storage |
Accessories |
Dispenser; RS 232C Interface Cable; Enhanced Power Supply |
Memory |
512k total RAM 512k flash memory. Additional 2Mb or 4Mb flash memory optional extensions |
Additional Memory |
2Mb or 4Mb additional flash memory |
